Wireless Receivers

Manufacturer Product Image Item Name Price-
Shure SLX4 Receiver Only

Shure SLX4 Receiver Only

The Shure SLX4 wireless receiver is a breeze to use with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, the receiver is ready for immediate installation right out of the box. LX Wireless Systems feature Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology. Shure SLX4 Wireless Diversity Receiver Specifications: Audio Output Level (ref. ± 38 kHz deviation with 1 kHz tone): XLR connector (into 600 Ohm load): 13 dBV; 1/4 inch connector (into 3000 Ohm load): 2 dBV Output Impedance: XLR connector: 200 Ohms; 1/4 inch connector: 1kohms XLR output: Impedance balanced; Pin 1: Ground; Pin 2: (+); Pin 3: (-) Sensitivity: 105 dBm for 12 dB SINAD, typical Image Rejection: >70 dB, typical Power Requirements: 12 18 Vdc at 150 mA, supplied by external power supply Operating Range Under Typical Conditions: 300 ft. (100m) Note: Actual range depends on RF signal...

Kenny Kable iKenny Cable (Shure beltpack transmitter cable)

Kenny Kable iKenny Cable (Shure beltpack transmitter cable)

PLEASE CALL TO PLACE AN ORDER VIA CREDIT CARD +1-989-779-8828 ONLY PAYPAL IS ACCEPTED WHEN PURCHASING THROUGH THE WEBSITE The "Kenny Kable" is custom made by Roth Electric Sound to connect the headphone output from ANY device to the input of a SHURE or MIPRO wireless belt-pack transmitter. (Audio-Technica version is also available). This 28" long cable adaapter includes the necessary mono-summing network to properly sum the L/R signal while protecting the headphone output from being shorted (by improper adapters). Will work with ANY jambox, laptop, MP3 player, phone, etc. that has a standard (3.5mm) headphone output jack. Included bonus: 3.5mm female to 1/4 male adapter for other applications, such as the line-level output of a mixer or Metronome. PLEASE CALL TO PLACE AN ORDER VIA CREDIT CARD +1-989-779-8828 ONLY PAYPAL ACCEPTED WHEN PURCHASING THROUGH THE WEBSITE

Featured Products - Wireless Receivers



Copyright © 2020 Roth Sound.
Powered by GreyVox
ebay powerseller
pay with credit card
pay with paypal
pay with google checkout
Visit Roth Electric Sound on ShopMania

Most users do not need a license to operate a wireless microphone system. Nevertheless, operating a microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.