Wireless Receivers


Manufacturer Product Image Item Name Price-
Shure ULXP4D Dual Professional Receivers

Shure ULXP4D Dual Professional Receivers

Shure ULXP4D The Shure ULX® Professional wireless receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The expanded feature set of the ULXP4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals. Package includes rackmount kit.
$1,213.00



Shure ULXP4 Wireless Receiver

Shure ULXP4 Wireless Receiver

ULX Series Wireless: Professional Wireless Receiver The Shure ULX Professional wireless receiver offers an exceptional value in performance and price for working musicians and sound installers. The expanded feature set of the ULXP4 wireless receiver - with advanced settings and controls including lockable settings and group scan - offers a direct path to full, clear audio signals. This receiver works with the following Shure ULX Series microphones (call your Sweetwater Sales Engineer for bodypack/handheld compatibility) Omni - WL93, WL183 Cardioids - WL185, WL184 Headset - WBH53 (Black) or WBH53T (Tan) Cardioids - SM58 (ULX258J1), Beta 87C (ULX2B87CJ1) Super Cardioids - SM87 (ULX287J1), Beta 58A (ULX2B58AJ1), Beta 87A (ULX2B87AJ1) ULXP4 Wireless Receiver Features: Power On Indicator Receiving Antenna Indicators Automatic Frequency Selection Over 1400 selectable frequencies SQUELCH Indicator SCAN Indicator for Scanning Open Group and/or Channel Frequencies Transmitted (TX) Audio...
$616.00



Shure ULXS4 Wireless Receiver

Shure ULXS4 Wireless Receiver

The Shure ULXS4 standard wireless receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The feature set of the versatile ULXS4 receiver offers a direct path to full, clear audio signals, unencumbered and unattached. Shure ULXS4 Standard Wireless Receiver Specifications: RF Carrier Frequency Range 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is used). Refer to the frequency supplement supplied with the system. Effective Range 100 m (300 ft.) under optimal conditions NOTE: Actual working range depends on RF signal absorption, reflection, and interference Audio Frequency Response 25 to 15,000 Hz, ±2 dB NOTE: Overall system frequency response depends on the microphone element. Receiver Input Connector: Antenna; Power Input Connector Type: Antenna: BNC; Power Input IEC 320 Actual Impedance: Antenna: 50; Power Input: Nominal Input Level: Antenna: 95 to 30 dBm;...
$446.00



Shure SLX4 Receiver Only

Shure SLX4 Receiver Only

The Shure SLX4 wireless receiver is a breeze to use with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, the receiver is ready for immediate installation right out of the box. LX Wireless Systems feature Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology. Shure SLX4 Wireless Diversity Receiver Specifications: Audio Output Level (ref. ± 38 kHz deviation with 1 kHz tone): XLR connector (into 600 Ohm load): 13 dBV; 1/4 inch connector (into 3000 Ohm load): 2 dBV Output Impedance: XLR connector: 200 Ohms; 1/4 inch connector: 1kohms XLR output: Impedance balanced; Pin 1: Ground; Pin 2: (+); Pin 3: (-) Sensitivity: 105 dBm for 12 dB SINAD, typical Image Rejection: >70 dB, typical Power Requirements: 12 18 Vdc at 150 mA, supplied by external power supply Operating Range Under Typical Conditions: 300 ft. (100m) Note: Actual range depends on RF signal...
$380.00



Kenny Cable iKenny Cable iKenny Kable Shure beltpack adapter

Kenny Cable iKenny Cable iKenny Kable Shure beltpack adapter

The "i-Kenny Kable" is custom made by Roth Electric Sound to connect the headphone output from an Ipod type device to the input of any Shure wireless belt-pack transmitter. Originally developed for MARCHING BAND DIRECTORS to use their iPhone-based METRONOME with the SOUND PROJECTIONS SOUND MACHINE, FREEDOM, OR VOICE MACHINE MODELS WIRELESSLY. This 28" long stereo mini to TA4F (mini-XLR connector) includes the necessary mono-summing network to properly sum the L/R signal while protecting the headphone output from being shorted out (by using a "Y" adapter, a very bad idea that can let the magic smoke out of your phone). Connect your Ipad and Iphone type devices to your sound system (wireless mic) transmitter and rock on. !!! Will work with ANY jambox, laptop, MP3 player, phone, etc. that has a 1/8" (3.5mm) headphone output jack. /* */
$69.00




Featured Products - Wireless Receivers


Lowerprice

,

Copyright © 2018 Roth Sound.
Powered by GreyVox
ebay powerseller
pay with credit card
pay with paypal
pay with google checkout
Visit Roth Electric Sound on ShopMania

CONSUMER ALERT
Most users do not need a license to operate a wireless microphone system. Nevertheless, operating a microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.