Shure 522 Dynamic

$130.00

Add to Cart:

The Model 522 is a dynamic base station microphone designed especially for radio communications, paging, and dispatching systems. Its cardioid (unidirectional) pickup pattern suppresses unwanted background noise - the type of noise generated by other dispatchers working nearby, by ventilating equipment, or by office machines in the same area. It also eliminates or reduces feedback in public address paging applications.Features * Dual impedance (19 to 300 ohms or High)

  • Impedance change switch for convenient change-over
  • Finger-tip control bar (locking or non-locking action) to actuate microphone circuit and an external relay or control circuit
  • Long-life switch to satisfy rigorous requirements of communications and paging systems
  • Sturdy, high impact ARMO-DUR base and microphone case
  • Adjustable microphone height
  • Dependibility - under all operating conditions
  • Conversion kit available for Monitor/Transmit switchingSpecifications
  • Type: Dynamic
  • Frequency Response: 60 to 11,000 Hz
  • Polar Pattern: Cardioid (unidirectional)
  • Press-to-Talk Switch: locking or nonlocking operation to actuate microphone circuit and an external relay or control circuit. Microphone circuit normally shorted in both high and low impedance
  • Impedance Selection Switch: double-pole double-throw slide switch in microphone base to provide either high- or low-impedance operation
  • Cartridge Shock Mount: Internal rubber vibration-isolator
  • Cable: 2.1 m (7 ft) four-conductor, two conductors shielded non-detachable
  • Case: Two-tone gray ARMO-DUR with dull-chrome-plated steel screen
  • Weight: 1 lb 10 oz (net); 2 lbs 4 oz (shipping)
    • Model: 522
    • Manufactured by: Shure


    Bookmark and Share
    Acoustic Sound Design Consultation System

    ,

    Copyright © 2017 Roth Sound.
    Powered by GreyVox
    ebay powerseller
    pay with credit card
    pay with paypal
    pay with google checkout
    Visit Roth Electric Sound on ShopMania

    CONSUMER ALERT
    Most users do not need a license to operate a wireless microphone system. Nevertheless, operating a microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.