Power Amps


Manufacturer Product Image Item Name Price+
QSC RMX 4050a Stereo Power Amplifier

QSC RMX 4050a Stereo Power Amplifier

$1,499.00



Yamaha XP7000 Power Amplifier

Yamaha XP7000 Power Amplifier

XP7000 XP is the Yamaha’s new 5-model power amplifier series for installation that achieves high soundquality and high cost performance. The power amplifier featuring high power, high quality, highreliability and high stability matches various installation sound systems and provides superioracoustic features even in live performance applications. Features: High sound quality equivalent to upper-class modelswith parts and emphasizing on superior sound While realizing a design that ensures high soundquality, efficiency has been planned down to the finest details for fullachievement of both high-definition sound and superior value Yamaha's exclusive state-of-the-art high-efficiencyamplifier driving technology EEEngine installed A gain switch that can be changed to +4dBu / 26dB /32dB has been installed on the rear panel for compatibility with a widevariety of input levels Light weight and compact design of 2U size forinstallation in any location Monitor and remote terminals for monitoring...
$1,589.00



QSC PL340 2-Channel Power Amplifier

QSC PL340 2-Channel Power Amplifier

$1,597.00



QSC RMX 5050a Professional Power Amplifier

QSC RMX 5050a Professional Power Amplifier

The RMX Series amplifiers give you clean, dynamic power with the legendary QSC sound quality and reliability that pros depend on. The RMX 5050 delivers 5000 Watts @ 4 ohms bridged mono, 2500 Watts per channel @ 2 ohms stereo, 1800 Watts per channel @ 4 ohms stereo and 1100 Watts per channel @ 8 ohms stereo. Perfectly suited for a wide range of sound reinforcement applications including professional touring, performing musicians, and mobile entertainers, the RMX5050 is optimized to deliver high levels of sustained power, extraordinary audio performance and road-proven reliability. QSC RMX 5050 Professional Power Amplifier Compact size Professional quality performance - incorporates road-proven QSC designs High-current toroidal transformers for greater two-ohm power and low noise Independent user-defeatable clip limiters reduce distortion Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom Balanced 1/4" (6.3mm) TRS, XLR and barrier strip inputs...
$1,699.00



QSC CX702 Amplifier

QSC CX702 Amplifier

QSC CX702 The all new CX Series is designed to meet the specialized needs of sound contractors. Five low impedance models and three 70-volt direct models have been designed from the ground up, combining QSC's exclusive PowerWave technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and reliability, the CX Series is the ideal solution ot any permanently installed sound system. The new CX amplifiers are equipped with many contractor-specific features including 1dB detented gain controls for easily repeatable settings and a custom security cover for tamper-proof installations. Active Inrush Limiting eliminates AC inrush current, cutting the need for power sequencers. CXs also now include an HD-15 Data Port connector to interface with QSControl, QSC's computer-controlled audio system, that allows remote amplifier monitoring and control via a standard Ethernet network. Power 8 ohms, Stereo...
$1,769.00



QSC CMX2000Va Power Amplifier

QSC CMX2000Va Power Amplifier

The amplifier uses a powerful high-current toroidal transformer with filtering to ensure sufficient energy reserves. This allows the amplifier to handle high-level transients even when driving 2Ω speaker loads. The amplifier output sections feature 3-tier class H architecture. The class H output section reduces AC current draw and cuts down on unnecessary heat. Automatic current limiting protects the amplifier from damage until the short is corrected. It also features DC protection systems to prevent loudspeaker damage in the unlikely event of an output transistor failure. DC voltage from the power supply is never passed directly to your speakers even in case of an output circuit breakdown. A full complementary output circuit using high-grade linear output devices generates a flat-frequency response with low distortion. SMT (Surface Mount Technology) triples small-signal component density enabling high power output in a 3RU chassis less than 16 deep. The output devices are...
$1,780.00



QSC PLD4.5 Multi-Channel System Processing Amplifier

QSC PLD4.5 Multi-Channel System Processing Amplifier

QSC PLD4.5 Multi-Channel System Processing Amplifier The QSC PLD4.5 represents a revolutionary advancement in amplifier technology and innovation. The PLD Series consists of three powerful, lightweight, four-channel amplifiers, each with onboard, advanced DSP and the capability to configure and combine channels in various ways to drive a wide range of loudspeaker systems. These amplifiers not only make your system perform better today, but also provide a wide and flexible range of options for future system growth
$1,999.00



QSC CX902 Amplifier

QSC CX902 Amplifier

QSC CX902 DetailsThe CX 2-Channel Series is designed to meet the specialized needs of sound contractors. Five low impedance models and three 70 volt direct models have been designed from the ground up, combining QSC's exclusive PowerLight� technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and reliability, the CX Series is the ideal solution to any permanently installed sound system. The expanded eight model line now incorporates QSC's exclusive PowerLight technology. Three models, the CX302V, CX602V and CX1202V, add direct 70 volt capability ranging from 250 watts to 1000 watts per channel for distributed audio systems. The CX302, CX502, CX702, CX902 and CX1102 are low impedance versions ranging in power from 325 watts to 1100 watts per channel at 4 ohms (20 Hz -20 kHz, 0.05% THD).The new CX amplifiers are equipped with many contractor specific features including 1 dB detented...
$2,119.00



QSC CX1202V

QSC CX1202V

QSC CX1202V The all new CX Series is designed to meet the specialized needs of sound contractors. Five low impedance models and three 70-volt direct models have been designed from the ground up, combining QSC's exclusive PowerWave technology with specific features to meet the requirements of fixed installations. With high output power, versatile loading options, high thermal capacity and reliability, the CX Series is the ideal solution ot any permanently installed sound system. The new CX amplifiers are equipped with many contractor-specific features including 1dB detented gain controls for easily repeatable settings and a custom security cover for tamper-proof installations. Active Inrush Limiting eliminates AC inrush current, cutting the need for power sequencers. CXs also now include an HD-15 Data Port connector to interface with QSControl, QSC's computer-controlled audio system, that allows remote amplifier monitoring and control via a standard Ethernet network. Power 8 ohms,...
$2,120.00



QSC CX1102 Amplifier

QSC CX1102 Amplifier

$2,340.00



QSC PL380 PowerLight 3 Series Amplifier

QSC PL380 PowerLight 3 Series Amplifier

$2,357.00




Acoustic Sound Design Consultation System

,

Copyright © 2018 Roth Sound.
Powered by GreyVox
ebay powerseller
pay with credit card
pay with paypal
pay with google checkout
Visit Roth Electric Sound on ShopMania

CONSUMER ALERT
Most users do not need a license to operate a wireless microphone system. Nevertheless, operating a microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.