Power Amps


Manufacturer- Product Image Item Name Price
QSC PLX3602 Power Amplifier

QSC PLX3602 Power Amplifier

The PLX3602 power amplifier is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2-ohm loading), or when extremely high power bridged mono operation is required. Features built-in subwoofer processing, filter switches, and front panel indications of bridged mono status. The PLX3602 power amp has a solid, cast-aluminum front panel that adds professional style to any rack while also acting as an integral I-beam, rigidly tying the chassis together for years of on-the-road reliability. Additional mechanical touches such as the side stiffening rails, rear rack ears and cable tie anchor points attest to QSC's years of experience and attention to detail. QSC has even designed the integrated front handles so the amplifier slides into a rack without scraping your fingers on the rack sides. PowerLight Technology PowerLight switchmode technology replaces a large, heavy AC transformer (typically 20 lbs.) with a highly efficient and lighter-weight...
$1,259.00



QSC RMX 1450a Stereo Power Amplifier

QSC RMX 1450a Stereo Power Amplifier

$529.00



QSC RMX 2450a Stereo Power Amplifier

QSC RMX 2450a Stereo Power Amplifier

$749.00



QSC RMX 4050a Stereo Power Amplifier

QSC RMX 4050a Stereo Power Amplifier

$1,499.00



QSC RMX 5050a Professional Power Amplifier

QSC RMX 5050a Professional Power Amplifier

The RMX Series amplifiers give you clean, dynamic power with the legendary QSC sound quality and reliability that pros depend on. The RMX 5050 delivers 5000 Watts @ 4 ohms bridged mono, 2500 Watts per channel @ 2 ohms stereo, 1800 Watts per channel @ 4 ohms stereo and 1100 Watts per channel @ 8 ohms stereo. Perfectly suited for a wide range of sound reinforcement applications including professional touring, performing musicians, and mobile entertainers, the RMX5050 is optimized to deliver high levels of sustained power, extraordinary audio performance and road-proven reliability. QSC RMX 5050 Professional Power Amplifier Compact size Professional quality performance - incorporates road-proven QSC designs High-current toroidal transformers for greater two-ohm power and low noise Independent user-defeatable clip limiters reduce distortion Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom Balanced 1/4" (6.3mm) TRS, XLR and barrier strip inputs...
$1,699.00



QSC RMX 850a Stereo Power Amplifier

QSC RMX 850a Stereo Power Amplifier

$399.00



Crest Audio CM 2204 power amplifier

Crest Audio CM 2204 power amplifier

Crest Amplifier CM 2204 Design Focus The CM amplifier series drives 4 or 8 independent channels into low impedance or 70 Volt loads.With this advanced amplifier architecture, there is no need to select the load impedance. Each channel can drive 4 Ohms and up for flexible system configuration. Sonics are outstanding, and the price enables use in a multitude of applications. High efficiency allows up to 8 channels in a space-saving 2U rack height. A switch allows selection of 0.775 Volt sensitivity or x40 gain. A high-pass filter is selectable per channel. 100 and 50 Volt operation is supported with our CMx accessory. Power into 4 Ohm - 150 W x 4 Power into 8 Ohm - 220 W x 4 Power @ 70V - 220 W x 4 Multi-load architecture allows low impedance or 70 Volt operation without select switch (100 or 50 Volt output operation with CMx accessory) Low mains current draw Compact design allows up to 8 channels in a 2U rack space Low weight Cost-effective for many multi-channel applications Flexible...
$1,080.00



Ashly KLR-2000 Stereo Power Amplifier

Ashly KLR-2000 Stereo Power Amplifier

The KLR-2000 from Ashly is a professional-quality power amplifier that provides high-quality audio in a lightweight and efficient design. The amplifier has a 2RU rackmount design for installation in any equipment rack. It can operate in stereo, bridged, or parallel modes for terrific versatility. The Class-AB circuitry provides excellent efficiency, while the switch mode power supply delivers deep bass, punchy midrange, and clear treble. The amplifier has Euroblock and combo XLR/TRS inputs, as well as Neutrik Speakon outputs, allowing you to connect to virtually any professional sound system. The amplifier features front panel level controls for each channel, as well as indicator LEDs for output level, clip/protect, and power on/off. Each channel has a 3-position gain switch, as well as a 3-position high pass filter switch. A switchable limiter is also built in to prevent distortion. A forced air cooling system with front-to-rear air flow and removable dust filters prevents the...
$630.00



Ashly KLR-3200 Stereo Power Amplifier

Ashly KLR-3200 Stereo Power Amplifier

The KLR-3200 from Ashly is a professional-quality power amplifier that provides high-quality audio in a lightweight and efficient design. The amplifier has a 2RU rackmount design for installation in any equipment rack. It can operate in stereo, bridged, or parallel modes for terrific versatility. The Class-AB circuitry provides excellent efficiency, while the switch mode power supply delivers deep bass, punchy midrange, and clear treble. The amplifier has Euroblock and combo XLR/TRS inputs, as well as Neutrik Speakon outputs, allowing you to connect to virtually any professional sound system. The amplifier features front panel level controls for each channel, as well as indicator LEDs for output level, clip/protect, and power on/off. Each channel has a 3-position gain switch, as well as a 3-position high pass filter switch. A switchable limiter is also built in to prevent distortion. A forced air cooling system with front-to-rear air flow and removable dust filters prevents the...
$740.00



Ashly KLR-4000 Stereo Power Amplifier

Ashly KLR-4000 Stereo Power Amplifier

he KLR-4000 from Ashly is a professional-quality power amplifier that provides high-quality audio in a lightweight and efficient design. The amplifier has a 2RU rackmount design for installation in any equipment rack. It can operate in stereo, bridged, or parallel modes for terrific versatility. The 2-step Class-H circuitry provides excellent efficiency, while the switch mode power supply delivers deep bass, punchy midrange, and clear treble. The amplifier has Euroblock and combo XLR/TRS inputs, as well as Neutrik Speakon outputs, allowing you to connect to virtually any professional sound system. The amplifier features front panel level controls for each channel, as well as indicator LEDs for output level, clip/protect, and power on/off. Each channel has a 3-position gain switch, as well as a 3-position high pass filter switch. A switchable limiter is also built in to prevent distortion. A forced air cooling system with front-to-rear air flow and removable dust filters prevents the...
$920.00



Ashly KLR-5000 Two-Channel High Performance Amplifier

Ashly KLR-5000 Two-Channel High Performance Amplifier

The KLR-5000 Two-Channel High Performance Amplifier from Ashly delivers a minimum power of 2500W per channel into 2 Ohm loads, 1700W RMS per channel into 4 Ohm loads, or 1000W RMS per channel into 8 Ohm loads with both channels operating. The KLR-5000 is optimized to deliver high levels of sustained power, extraordinary audio performance, and road-proven reliability into 2, 4, or 8 ohm loads and are housed in a uniform, rugged, 2RU chassis. The output topography of the KLR-5000 is a two step class-H design. The protection circuits include output over current protection, DC output protection, chassis internal temperature monitoring, inrush limiting and a main circuit breaker. The KLR-5000 incorporates the latest technologies delivering quality and value for professional performance at an extremely affordable price. Whether your application is professional audio or fixed performance installation, the KLR-5000 amplifier is optimized to provide reliable audio performance with sonic...
$1,275.00




need help deciding

,

Copyright © 2018 Roth Sound.
Powered by GreyVox
ebay powerseller
pay with credit card
pay with paypal
pay with google checkout
Visit Roth Electric Sound on ShopMania

CONSUMER ALERT
Most users do not need a license to operate a wireless microphone system. Nevertheless, operating a microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.