Lectrosonics DMPA12

$3,165.00

Add to Cart:

Lectrosonics DMPA12

The DMPA12 is a powerful digital audio processor and multi-channel power amplifier combined into a single rack space component designed to work with DM Series processors. The design represents a milestone in DSP technology in its basic architecture and in its processing speed and efficiency. The primary applications are sound reinforcement and teleconferencing in boardrooms, courtrooms, worship centers, distance learning systems, hotels and other applications with multiple microphones and loudspeakers. The design is ideally suited to mix-minus sound reinforcement systems.

Inputs are taken from the DANI™ bus (Digital Audio Network Interface) which is common to all DM Series components.

Each output can drive a variety of loads, including loudspeakers, long cable runs and headphones. The BTL configuration allows two adjacent channels to be wired in parallel on a common load to double the output power. The amplifier is designed to run continuously (idle or with a load) without heat buildup, making it ideal for permanent installations where prolonged operation is required.

Class-D amplification is implemented with a late generation component that provides exceptional efficiency, low heat, excellent audio performance and is indestructible with wiring errors. Each output channel includes a delay, nine filters, a compressor and limiter. Settings are stored in memory with different 24 presets available for immediate recall of all setup parameters. Presets can be recalled with serial commands or simple contact closures.

Features

  • 12-channel class-D power amp with bridge tied load (BTL)
  • 10 Watts per channel; adjacent channels can be tied together for doubled output power
  • Every output channel includes a DSP delay, nine filters, compressor and limiter
  • Passively cooled; no heat buildup
  • Inputs are taken from the Lecnet 2 DANI™ bus forward or backward propagated final mix signals - no analog inputs are provided
  • Front panel level controls and LED signal status indicators

    Specifications

  • Amplifier Type: Class-D with bridge tied load (BTL)
  • Number of Outputs: 12
  • Rated Power Per Output Channel: 10 Watts (Two outputs can be tied together for 20 Watts into 4 ohms)
  • Load Impedance: 4 to 8 ohms
  • Total Harmonic Distortion (THD): 0.2% (10mW to 10W, 20Hz to 20kHz)
  • Dynamic Range: 95 dB
  • Frequency Response Flatness: +/-1dB (20Hz to 20kHz)
    • Model: DMPA12
    • Manufactured by: Lectrosonics


    Bookmark and Share
    Acoustic Sound Design Consultation System

    ,

    Copyright © 2017 Roth Sound.
    Powered by GreyVox
    ebay powerseller
    pay with credit card
    pay with paypal
    pay with google checkout
    Visit Roth Electric Sound on ShopMania

    CONSUMER ALERT
    Most users do not need a license to operate a wireless microphone system. Nevertheless, operating a microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.