Lectrosonics DM1624F

$5,125.00

Add to Cart:

The DM1624 from Lectrosonics is a digital audio processor, that shares many of the DSP functions common in the marketplace, but with a very comprehensive routing system that allows any input to be patched to any single or multiple outputs simultaneously. General applications include sound reinforcement, boardroom conferencing, houses of worship, courtrooms and hotels. Any place which requires the use of multiple microphones and loudspeakers.

The unit provides sixteen microphone/line inputs, twenty-four line outputs (eight switchable to microphone output) with each input possessing a fixed sequence of multiple DSP filters, ADFE (automatic digital feedback eliminator), a compressor and a digital delay.

During the routing stage (the matrix mixer), gain can be adjusted and then each output provides a digital delay, multiple DSP filters and a compressor/limiter. Modules have extensive editing parameters, and can be switched in or out of the signal path as required.

The DM1624 features an algorithm to help with the performance of multiple microphone sources. Each microphone input can be assigned to a different mode that will govern how that microphone behaves in respect to other open sources. Attenuation of various sources is done in an intelligent and seamless manner, eliminating gating and its detrimental effects. Further, since the processing happens on the output, each input can function differently at each destination.

The unit can be programmed from the front-panel or via Windows software and a RS232 or USB equipped computer. Remote hardware control is also possible once the initial set-up is complete. Multiple units can be interfaced for greater system resources. Finally, all functions are available on all inputs and outputs without impacting DSP resources. Latency is minimal, even in multiple unit situations.

Key Features

  • Fan Cooling
  • Digital matrix processor with sixteen microphone/line inputs, twenty-four line outputs (eight switchable to microphone output)
  • 16 x 24 digital matrix mixing with gain adjustable from -69dB to +20dB
  • Microphone outputs can be used for connecting to a recording device
  • Proportional gain auto mixing algorithm with "AutoSkew," a process that eliminates artifacts such as comb filtering and abrupt gating that occur with conventional automatic mixing schemes
  • Auto mixing operates at the output of the matrix, with each input channel being able to participate differently in each output mix
  • Each output has its own NOM (Number of Open Microphones) mixing bus
  • Six filter stages plus compressor, ADFE (Automatic Digital Feedback Elimination) and delay on each input
  • Nine filter stages plus compressor, limiter and delay on each output
  • 128 macros available for storing up to 64 commands per macro
  • USB and RS-232 interfaces for setup and control
  • Digital I/O ports for "daisy chaining" and to connect other LecNet 2 devices
  • AMX and CRESTRON compatible
    • Model: DM1624
    • Manufactured by: Lectrosonics


    Bookmark and Share
    Acoustic Sound Design Consultation System

    ,

    Copyright © 2017 Roth Sound.
    Powered by GreyVox
    ebay powerseller
    pay with credit card
    pay with paypal
    pay with google checkout
    Visit Roth Electric Sound on ShopMania

    CONSUMER ALERT
    Most users do not need a license to operate a wireless microphone system. Nevertheless, operating a microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.