Hear Technologies Hear Back Personal Monitor 4-Pack System

$1,495.00

Add to Cart:

A basic Hear Back system consists of a Hub and personal Mixers connected using standard CAT5E cables. A single Hub supplies signal and power to a maximum of eight Mixers. That’s one for you and everybody in the band. If that’s not enough, the Hubs can be daisy-chained using the HearBus In and Out for virtually unlimited system size. The Hear Back Hub can accept analog input signals from audio mixers, auxiliary, matrix, monitor, and/or direct outputs.

The ADAT input can come from digital audio workstations, digital recorders, or digital mixers. For front of house or remotely located digital mixers, we also have the Extreme Extender ADAT In/Out that converts ADAT optical, which has very limited distance, to the HearBus for transmission of up to 500 feet.

Includes

  • (4) Mixers
  • (1) Hub
  • (4) 50' CAT5e Cables
  • (1) Analog DA-88 Style Cable

    Mixer Features

  • Local control up to eight channels of audio
  • Master volume
  • Built-in DSP limiter
  • 24-bit D/A converters
  • Less than 1.5 millisecond total system delay
  • Bus status indicator
  • Headphone amplifier fault indicator
  • Link indicators
  • Standard CAT5E power and signal connection
  • Balanced line outs, mono/stereo
  • Stereo AUX in: – Expand numbers of mixers – Drum module/metronome input
  • Built-in standard threaded mic stand mount

    Hub Features

  • Three switch selectable 8-channel input sources: – ADAT Optical – Analog – HearBus
  • 24-bit A/D converters
  • Digital inputs: 44.1KHz and 48 KHz sample rates
  • Less than 1.5 milliseconds system delay
  • 3-LED four-level metering
  • Standard CAT5E - delivers power and signals to mixers
  • Daisy-chain for very large systems
  • Internal universal input power supply
  • 1 RU chassis
    • Manufactured by: Hear Technologies


    Bookmark and Share
    Lowerprice

    ,

    Copyright © 2017 Roth Sound.
    Powered by GreyVox
    ebay powerseller
    pay with credit card
    pay with paypal
    pay with google checkout
    Visit Roth Electric Sound on ShopMania

    CONSUMER ALERT
    Most users do not need a license to operate a wireless microphone system. Nevertheless, operating a microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.