Audio-Technica M2 In-Ear Wireless System

$599.00

Add to Cart:

A-T M2 is an in-ear wireless system that is an excellent in-ear monitoring solution! The M2 Wireless System delivers professional in-ear monitoring, giving you your own accurate mix-all without the problems associated with using floor monitors.

You and other musicians on stage using the M2 wireless system can control the volume and mix of two separate signals using the M2R stereo body-pack receiver, ensuring that you hear yourself accurately. Plus, the M2 Wireless In-Ear Monitoring System's high-fidelity and articulate sound lets you hear yourself better at lower volumes, saving your eardrums, and providing the quality of monitoring you need to perform your best.

Expect great sound with Audio-Technica's M2 Wireless In-ear Monitor System. The M2 system also offers your personal mix control, allowing volume and mix control of two independent signals at the receiver. This way, you can dial in the right sound and blend you need to give your best performances. The M2Ls come with three sizes of rubber eartips, plus an ear-conforming foam tip for a comfortable feel and personal fit.

You get amazing high-quality, and articulate sound with the M2 system. You will hear yourself like never before, especially at lower volumes. You can rely on these Audio-Technica in-ear monitors' dynamic drivers to deliver full-frequency response and outstanding isolation, time after time.

Features

  • EP3 Headphones
  • M2T Stereo Transmitter
  • M2R Stereo Receiver
  • High-fidelity sound
  • Can hear yourself better at lower volumes
  • Band M operates on frequencies between 614.000 to 647.000Mhz
  • Band L operates on frequencies between 575.000 to 608.000Mhz 100 selectable UHF channels
  • Up to 10 simultaneous systems per frequency band 3.5mm line-in jack connects to ambient microphone, click track, and more
  • LED indicators provide easy-to-read level monitoring
  • XLR loop output (true pass-through) connects to signal mixing console, additional IEM systems or recording device with no signal degradation
  • Adjustable squelch eliminates annoying static
  • Pilot tone protects against RF interference when the transmitter is turned off
  • Limiter (defeatable) helps protect your hearing from sudden peaks
  • Portable system is quick to load and set up
  • Reduces on-stage audio clutter for better overall mix and less feedback
  • Use any number of M2R Stereo Receivers (with Personal Mix Control) on the same frequency
  • Dynamic drivers offer full frequency response and excellent isolation
  • Personal fit with 3 sizes of rubber eartips, and ear-comforming foam tip

    OVERALL SYSTEM SPECIFICATIONS

  • Operating Frequencies Band E: 790.000 to 822.000 MHz, 100 frequencies
  • Band F: 832.000 to 865.000 MHz, 100 frequencies
  • Band L: 575.000 to 608.000 MHz, 100 frequencies
  • Band M: 614.000 to 647.000 MHz, 100 frequencies
  • Not all frequency bands available in all areas. Please check with local regulations.
  • Minimum Frequency Step 25 kHz
  • Modulation Mode FM stereo
  • Maximum Deviation ±40 kHz
  • Dynamic Range 90 dB (typical), A-weighted
  • Total Harmonic Distortion <1% at (1 kHz, ±20 kHz Deviation)
  • Operating Range 100 m (300'), typical
  • Open range environment with no interfering signals.

  • Operating Temperature Range -5° C (23° F) to +50° C (122° F)
  • Battery performance may be reduced at very low temperatures.
  • Frequency Response 60 Hz to 13 kHz (+/- 3 dB)
  • Simultaneous Use 10 channels per band (maximum recommended)
  • For assistance with multi-band operation or other frequency coordination issues, please contact your local Audio-Technica customer service representative.

    RECEIVER SPECIFICATIONS

  • Receiving System Double conversion superheterodyne
  • RF Sensitivity 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
  • Headphone Output Connector 3.5 mm TRS stereo phone jack
  • Headphone Output Power 65 mW (at 32 ohms)
  • Antenna Input SMA-type, 50 ohms
  • Aux Input Connector 3.5 mm TRS stereo phone jack
  • Batteries 2 x 1.5V AA (not included)
  • Battery Life 8 hours (alkaline)
  • Depending on battery type and use pattern
  • Dimensions 70.0 mm (2.76") W x
  • 25.0 mm (0.98") D x
  • 110.0 mm (4.33") H
  • Net Weight 110 g (3.9 oz), without batteries
  • Accessories Included EP3 earphone; frequency sticker; flexible antenna

    TRANSMITTER SPECIFICATIONS

  • RF Power Output 10 mW/30 mW (switchable), 50 ohms
  • Limited to 10 mW within 863 MHz to 865 MHz
  • Following national regulations
  • Spurious Emissions Following federal and national regulations
  • Input Connections XLRF-type/6.3 mm stereo (1/4") combination connector
  • Pin 1 and Sleeve: Ground
  • Pin 2 and Tip: Hot
  • Pin 3 and Ring: Cold
  • Maximum Input Level XLRF-type/6.3 mm stereo, (1/4") balanced: +26 dBu
  • 6.3 mm (1/4") mono, unbalanced: +26 dBu
  • Loop Output Connector XLRM-type connector
  • Pin 1: Ground
  • Pin 2: Hot
  • Pin 3: Cold
  • Power Requirement 12-18V DC, 600 mA
  • Antenna Attached whip
  • Dimensions 210.0 mm (8.30") W x
  • 132.0 mm (5.20") D x
  • 44.0 mm (1.70") H
  • Net Weight 870 g (30.7 oz), without accessories
  • Accessories Included AC adapter (country dependant); rack mount adapters
    • Model: M2 In-Ear Wireless System
    • Manufactured by: Audio Technica


    Bookmark and Share
    Lowerprice

    ,

    Copyright © 2017 Roth Sound.
    Powered by GreyVox
    ebay powerseller
    pay with credit card
    pay with paypal
    pay with google checkout
    Visit Roth Electric Sound on ShopMania

    CONSUMER ALERT
    Most users do not need a license to operate a wireless microphone system. Nevertheless, operating a microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888- CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones.